Turblo+

1. Press and hold the power button for 3 seconds to turn on the Turblo+.
2. Use the mode buttons [ < > ] to select one of the four modes.
   Bike 1, Bike 2, Bike 3: The bike modes let you store your preferred pressures for different bikes or tyres. The manual mode can be used for other inflatables, such as car tires and sports balls. Change pressure units (bar or PSI) by holding the light button.
3. Set your desired pressure using the [ + ] and [ - ] buttons. The selected pressure appears next to the battery icon. NOTE: Always check the recommended air pressure for the item being inflated. Do not over-inflate or under-inflate, as this can cause injury or damage.
4. Connect the pump to the valve.
   Different nozzles are included. Determine which nozzle you need (Schrader or Presta) and connect it to the air hose of the Turblo+. The ball needle (included) can be screwed into the hose for inflating sports balls.
5. Check the real-time pressure on the digital display’s top line (in bar or PSI).
6. Press the power button to start inflating. The Turblo+ automatically stops when your preset pressure is reached
7. Disconnect the Turblo+ from the valve.
8. Turn off the Turblo+ by holding the power button. Let it to cool before storing.
9. Enjoy your ride!

Inside the box you’ll find:
- Turblo+
- Schrader Valve Air Hose
- Presta Nozzle (purple)
- Ball needle
- USB-C Charging Cable
- Storage Bag
- User manual

Technical specifications
- Inflation Speed: 22 L/min
- Max Pressure: 10.0/145 PSI
- Battery Capacity: 2000 mAh 2S Lithium-Ion Battery
- Input 5 V/2 A
- Max power: 57 W
- Product Dimensions: 48x68x155mm
- CE, UKCA and CRM certified
- 2 - year warranty

A full charge gives you:
- up to 10x road tires of 28 mm (5.0 bar / 73 PSI)
- up to 18x MTB tires 29 inch (1.5 / 22 PSI)

Secret features of the Turblo+
The Turblo+ can also be used as a power bank. Plug in a USB-A cable and recharge your phone or other device; perfect for training camps and travel!