Lyte Remote

Assembly

1. Place Lyte Remote at the desired position on your handlebars.
2. Wrap the Velcro strap around the handlebars and tightly secure it in place.

Pairing to your Lyte 1200

1. Turn on your compatible Lyte light.
2. Switch the light to Breathe Mode. Press and hold the power button on the light for 2 seconds to enter Flash Mode. Then briefly press the power button to cycle to Breathe Mode.
3. Within 10 seconds, press and hold the Lyte Remote button for 1 second.
4. Once pairing is successful, the light automatically switches to Low Steady mode.

If pairing is unsuccessful, repeat the pairing process.

Controls

1. To turn the light on, press and hold the button for 1 second.
2. Press the button quickly to switch between Low Steady, Medium Steady or High Steady.
3. To change from steady to flash modes, press and hold the button for 2 seconds.
4. Press quickly to change from Daytime Flash to Breathe mode.
5. Double-press to switch directly to High Steady mode.
6. To turn the light off, press and hold the button for 1 second.

• Compatible with Dynamic Lyte 1200
• Extremely lightweight at 10 grams
• IPX6 waterproof
• Powered by a replaceable CR2032 battery
• Up to 8,000 button presses per battery
• Velcro mounting system